You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Control Tower | SmartDNS > Actiontec R1000H Router Setup for Smart DNS Proxy
Actiontec R1000H Router Setup for Smart DNS Proxy
print icon

 

It’s only necessary to set up Smart DNS Proxy one time in order to use it. After you set up Smart DNS proxy, you don’t have to follow these steps. Your connection will automatically use the correct DNS settings.

--- --- ---

It’s very simple to set up Smart DNS Proxy with most routers and modems. You can set your preferred DNS to use Privado’s DNS proxy IP addresses, then it’ll be ready to go.

1. Go to your router Admin Panel. 

Open a web browser like Chrome, Firefox, or Safari and go to the Actiontec  R1000H web admin. This can be accessed by going to the address http://192.168.0.1/ (or sometimes http://192.168.1.1/)

 

 

 

 

2. Login to your router Admin Panel.

Your default username should be “admin” and your default password should be “password”. Keep in mind that these are all lower case. Be sure to change your router password when you get into the admin panel so that other people won’t be able to access your router settings.

When you find and enter the correct credentials, you’ll be in the router dashboard.

 

 

 

3. Click on Advanced Setup from the top of the screen, then select WAN IP settings.

 

 

 

 

4. Change the Primary and Secondary DNS.

Set Primary and Secondary Server to the following:

Primary DNS: 91.148.225.50

Secondary DNS: 91.148.229.50

 

 

 

 

 

5. Click the Apply button.

 

 

 

 

6. Restart your Router.

We recommend that you restart your router whenever you make any settings changes. Many routers will automatically restart when you save new settings, but just in case it’s a good idea to manually restart anyway.

Feedback
0 out of 0 found this helpful

scroll to top icon